Milltronics airanger XPL plus User Manual

INTRODUCTION
ABOUT THIS MANUAL
This instruction manual provides information specific to the AIRANGER XPL PLUS (Ten Point Level) monitor.
When references are made to other Milltronics products associated with an
AIRANGER XPL PLUS (XPL+)
based level measurement system, refer to the associated product instruction manuals, if necessary.
All initial start up information is included in the white pages of this instruction manual. Refer to the grey pages
for additional information or technical assistance, if required.
After reading this and completing the physical , first time system
installers may wish to use the
AIRANGER XPL PLUS Quick Start Guide, for step by step start up instructions.
INTRODUCTION introduces installers and operators to the XPL+, with brief
descriptions of key features.
INSTALLATION provides a step by step procedure to install and interconnect an
XPL+ based level measurement system.
PROGRAMMING defines program mode display and keypad functions, and general
programming information.
QUICK START PARAMETERS details the minimum recommended programming required to
prepare the XPL+ for RUN mode operation.
OPERATION defines RUN mode display and keypad functions, including the RUN
mode entry procedure and performance evaluation recommendations.
APPLICATION PARAMETERS details the programmable features which may be used to alter XPL+
display, failsafe, SAM-20 relay, and AO-10 mA output operation.
ENHANCEMENT PARAMETERS defines the programmable features used to enhance RUN mode
operation. (Typically used as directed by the Troubleshooting Guide).
TECHNICAL REFERENCE provides detailed information for complex features and details 4
specific application examples.
TROUBLESHOOTING GUIDE provides a quick reference to installation modification and
programming remedies to overcome challenging operating conditions.
SPECIFICATIONS lists the environmental, physical, and operational characteristics
associated with the XPL+.
PROGRAMMING CHARTS provides a convenient space to record all programming for future
reference. (May also be used as a complete Parameter index).
REMEMBER!
"Programming is not complete until the Programming Charts are completed".
INSTALLATION INTRODUCTION
INTRODUCTION
PL-532 5

Milltronics airanger XPL plus Specifications

General

Brand	Milltronics
Model	airanger XPL plus
Category	Measuring Instruments
Language	English