5-14
Chapter 5 Maintenance
Fill up Ink
Supplies ink to correct nozzle clogging.
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press to select “FILL UP INK”,
and press the key.
3
Press to select the filling type.
• Soft : Use this in cases where head cleaning
will not achieve recovery, such as when
multiple clogged nozzles occur or
nozzle cluster dropout occurs.
• Normal : Use this if nozzle cluster dropout occurs
in initial ink filling.
• Hard : Use this in cases where the dumper has
become empty, such as in dumper
replacement.
4
Press the key.
• If you selected “Soft” in step 3, a Select Fill Up
Color screen will be displayed.
If you selected “Normal” or “Hard”, go to step 6.
5
Press to select the filling color,
and press the key.
6
Press the key.
• Ink is supplied automatically.
7
Press the key several times to
end the setting.
White Ink Maintenance
White ink precipitates easier than other inks.
• If not printing more than two weeks, white ink may precipi-
tate in the ink cartridge or inside of this machine.
• When an ink precipitates, the nozzle may be clogged and
it can not draw normally.
• Make sure to perform periodical maintenance to avoid pre-
cipitation and to keep white ink in good condition.
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press
(<<)
, and press the
key.
3
Press to select “WHITE MAINT”,
and press the key.
4
Press the key.
5
Press the key.
• The automatic discharging operation and the
filling operation are performed, then, cleaning is
performed.
6
Press the key several times to
end the setting.
• Perform the maintenance below before working
once a week.
• Use the specified ink cartridge.
As the component of white ink is easy to settle
out, it is necessary to shake it periodically.
• When 24 hours have passed with the power
supply is ON.
• When the power supply is ON, the warning
message “SHAKE WHITE INK CARTRIDGES” is
displayed.
To Next Page
Loading...
