MIMAKI CJV150-107 - Chapter 5: Adjusting Cutter Blade Edge

5-19
5
2
Chapter 5 Maintenance
Adjusting blade edge of cutter other
than supplied one
1
Loosen the lock nut.
2
Turn the adjusting knob to adjust the
protruding amount of the cutter blade.
3
Tighten the lock nut so that the adjusting
knob will not turn.
• The blade adjuster (Product No.: OPT-S1005) will
facilitate the adjustment of the protruding amount
of the blade.
Lock nut
Adjusting
knob