MIMAKI JFX-1631/1615 Plus - If the dot position is misaligned

4-24
If the dot position is misaligned
When the thickness of media to use, the head height or the dot size of data to be drawn has been changed,
perform the next operation to correct the ink drop position at bidirectional drawing (Bi) to gain the proper drawing
result.
Samples of pattern drawn
1
Set a media and the home position for drawing.
• A media of 100 x 300mm large at least is required for drawing patterns.
2
Select the “PRN.adjust MODE” of the maintenance menu.
(1)Press the key in the local mode.
(2)Select the [MAINTENANCE] by pressing or key, and press the key.
(3)Select the [PRN.adjust] by pressing or key.
(4)Press the key twice.
3
Select the drawing resolution by pressing or
key.
• Setting value : 300,600,1200 DPI
4
Press the key.
5
Select the pattern drawing speed by pressing or
key.
• Setting value : normal , high
6
Press the key.
7
Select the dot size by pressing or key.
• Set the DOT SIZE Large of data to be drawn in online printing.
• Setting value : Large 1 to 12
8
Press the key.
• Start pattern drawing.
+ 100 + 0 + 200 + 300 + 400
FUNCTION
ENTER
ENTER
PRN . a d j u s t
DP I : 3 0 0
PRN . a d j u s t
MODE : n o r ma l
ENTER
PRN . a d j u s t
MODE : h i g h
PRN . a d j u s t
DOT S I ZE L a r g e : 1
ENTER
PRN . a d j u s t
DOT S I ZE L a r g e : 4
ENTER