MIMAKI JFX-1631/1615 Plus - Registering the thickness of the media; Measuring the thickness of the media automatically

Registering the thickness of the media
3-5
3
Useful Function
Measuring the thickness of the media automatically
Thickness of media is automatically measured with the gap pin on the left of the carriage.
1
Set a media.
2
Press the key in the local mode.
3
Select the [HEAD HEIGHT] by pressing the or
key.
4
Press the key.
5
Select the [THICKNESS CHECK] by pressing the or
key.
6
Press the key.
• In preparation for the measuring, the Y-bar will move up to the top
position.
• The carriage will move to the drawing area.
7
Press the key.
• The media thickness will be measured automatically.
• The measured thickness will be displayed.
• The carriage will move to the evacuation position and the screen
returns to the one displayed in Step 4.
8
Press the key several times to end the setting.
• Be sure to set a media on the drawing area. If measured automatically without media, the
head can break.
FUNCT I ON
VIEW <ENT>
FUNCTION
FUNCT I ON
HEAD HE I GHT <ENT>
HEAD HE I GHT
MEDIA THICKNESS<ent>
ENTER
HEAD HE I GHT
TH I CKNESS CHECK< e n t >
TH I CKNESS CHECK
MOV I NG NOW
TH I CKNESS CHECK
CHECK START : e n t
ENTER
TH I CKNESS CHECK
** CHECKING **
TH I CKNESS CHECK
3.0mm :ent
HEAD HE I GHT
MEDIA THICKNESS<ent>
ENTER
END