iii
CHAPTER 4 Maintenance
Routine maintenance ............................................................ 4-2
When the device is left unused for a long period of time .. 4-2
Notes on cleaning ............................................................. 4-2
Maintenance of frame component .................................... 4-2
Ink cartridge .......................................................................... 4-3
Replacing with a new ink pack ......................................... 4-3
State of Lamp ................................................................... 4-5
How to shake an ink cartridge .......................................... 4-6
Ink cartridge trouble .......................................................... 4-7
Avoiding dripping of ink droplet at printing ............................4-8
Cleaning of the head guard plate ..................................... 4-8
Cleaning nozzle face automatically ..................................... 4-10
Setting of Interval Wiping ................................................ 4-10
Setting of Interval Cleaning ............................................ 4-11
Cleaning of wiper ................................................................ 4-12
Subtank Maintenance ......................................................... 4-15
Prevent the nozzle clogging of special color ....................... 4-16
When the waste ink is pooled up ........................................ 4-17
Disposing of the ink in the waste ink tank ....................... 4-17
Disposing of the ink in the wiper tank ............................. 4-18
Regular maintenance for white ink ...................................... 4-19
Replacing the filter of the cooling fan .................................. 4-21
Replacing the mist suction filter .......................................... 4-23
If the dot position is misaligned ........................................... 4-24
In case defective printing is not resolved ............................ 4-26
Filling the ink ................................................................... 4-26
Replacing water in water heater tank .................................. 4-28
Replacement method of antifreeze liquid water ............. 4-29
Replacing the UV LED Unit filter ......................................... 4-33
Irradiation Time of UV LED Unit .......................................... 4-35
Displaying the irradiation time of the UV LED unit .......... 4-35
Resetting the irradiation time of the UV LED unit ........... 4-35
Checking UV ink curing level .............................................. 4-36
Adjusting UV light level ................................................... 4-37
Setting vacuuming / blowing level of the vacuum unit ........ 4-38
Drawing the Drop Pattern ................................................... 4-39
To Next Page
Loading...
