– 1.7 –
Item JV3-75SPII JV3-130SL/JV3-130SPII JV3-160SP
Margin Leaf media Left end and right end : 15 mm
Front : 65 mm
Rear : 110 mm
Margin Roll media Left end and right end : 15 mm
Front : 25 mm
Rear : 0 mm
Distance Absolute accuracy Whichever the larger one of ± 0.3 mm or ± 0.3 % of the designated
accuracy Reoroducibility Whichever the larger one of ± 0.2 mm or ± 0.1 % of the designated
Perpendicularity ± 0.5 mm / 1000 mm
Media skew 5 mm or less / 10 m variable
Head height adjustment 2.0 mm / 3 mm variable from the platen surface
Cutting of media Cutting of Y direction by the head cutter,
Cutting accuracy(steps) : 0.5mm or less.
Ejecting media Take-up device as standard (inside winding / outside winding selectable)
Waste ink tank Bottle type ( 2,000 cc [1pcs.])
Replacement timing is judged visually.
Interface IEEE1394 compliant, IEEE1284 compliant
Command MRL-II (ESC/PV.2 base, MIMAKI original command)
Noise during standby : Less than 58 dB (FAST-A, Front & Rear & Left & Right 1 m)
during continuous printing : Less than 65 dB
during discontinuous printing : Less than 70 dB
Safety Standard UL, VCCI-classA, FCC-classA, CEmarking, CBreport,
Power AC 100 — 120 V± 10%, AC 220 — 240 V± 10%, 50/60 Hz ±1 Hz
Power consumption *3 1.0KVA or less 1.5KVA or less 1.5KVA or less
Recomended Available temp. 20 °C to 25 °C
Environment Humidity 35 to 65 % Rh (No condensation)
Guaranteed temp. 20 °C to 25 °C
Temperature change ± 10 °C / h or less
Dust Equivalent to normal office level
Weight Main unit 125 kg (130 kg*4) 165 kg (175 kg*4) 175 kg (185 kg*4)
Outside Width 1850 mm 2390 mm 2660 mm
dimensions Depth 750 mm 750 mm 750 mm
Height 1240 mm 1240 mm 1240 mm
*3 Main unit and heater
*4 With a front exhaust unit
To Next Page
Loading...
