– 5.70 –
5-6-2. DOWNLOAD (Computer >>> Plotter)
• To realize this function, the following item is required.
OS : Windows2000 / WindowsNT4.0 / Windows98SE
Cable: IEEE1394 interface cable / IEEE1284 interface cable
(The IEEE1394 interface cable can be used only for Windows2000.)
Tool: F/W Update Tool software
[Operation]
1) Connect the plotter and the host computer
through the interface cable.
2) Turn ON the power while holding down the
and key.
3) Download is ready.
4) Perform Download using the F/W Update Tool
software.
Receive data from the host computer.
To cancel the operation, press the
key.
5) If the operation is successfully completed, the
message shown at left appears.
6) Turn OFF the power of the plotter.
BOOT
UP&DOWNLOAD
READY!
∗ ∗ DOWNLOADING ∗ ∗
UP&DOWNLOAD END
POWER OFF
To Next Page
Loading...
Need help?
General
