MIMAKI TS34-1800A - Warning Message Interval Setting

Other Maintenance Functions
4-32
Set the interval to display the warning message (only when using sublimation dye ink)
Depending on the ambient temperature, set the interval to display the warning preventing color material
settling.
1
Select [AUTO MAINT.] of the maintenance menu.
(1) Press the key in LOCAL.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [AUTO MAINT.].
(4) Press the key.
2
Press to select [Sub-INK WARNING].
3
Press the key.
4
Press to set the operation time.
• Set value : OFF (disabled) or 1 to 120 hours
5
Press the key.
6
Press the key several times to end the setting.
• The display interval of the message is set to 72 hours in the initial condition.
AUTO MA I NT .
Sub - I NK WARNI NG<en t >
AUTO MA I NT .
Sub - I NK WARNI NG=
7 2h
AUTO MA I NT .
Sub - I NK WARNI NG=
8 4h
AUTO MA I NT .
Sub - I NK WARNI NG<en t >