MIMAKI TS34-1800A - Cutter Blade Replacement

4-33
1
1
1
4
Routine Maintenance
Replacing the Cutter Blade
The cutter blade is consumable.When the cutter blade gets dull, replace it with a new one (SPA-0107).
1
Press the key then press the
key.
• The carriage moves onto the platen.
2
Open the front cover.
3
Replace the cutter unit by the carriage.
(1) Loosen the screw of the cutter unit.
(2) Remove the cutter unit.
(3) Mount a new cutter unit.
(4) Fasten the screw of the cutter unit to secure the cutter unit.
• The blade is sharp.Be careful not to hurt yourself or anyone else.
• Store the cutter blade in a place that is out of the reach of children.In addition, dispose of used cutter
blades according to regional laws and regulations.
• When replacing the cutter blade, it is recommended to place a sheet of paper under the cutter blade.
This will help pick up the cutter blade if it drops.
Front cover
Screw Cutter unit