1-12
Inserting ink cartridges
Insert an ink cartridges.
1
Shake the ink cartridge as shown on the right.
2
Insert the ink cartridge.
• Insert the ink cartridge lengthwise with the surface having
IC chips pointing to the left side.
• Colors are displayed on the display as follows.
Black: K, Cyan: C, Magenta: M, Yellow: Y,
Blue: B, Light cyan: c, Light magenta: m, Light blue: b
Changing an ink cartridge
Perform as follows when [INK END] or [INK NEAR END] is displayed on the display.
When [INK END] is displayed
(1) Pull out an ink cartridge to be replaced.
(2) Insert a new ink cartridge, paying attention to the direction of IC chip.
When [INK NEAR END] is displayed
There is a little of ink left. It is recommended to replace the ink cartridge soon since ink may become empty in
printing while printing is continuously enabled.
• During [INK NEAR END] is displayed, the setting of In-printing cleaning is disabled. ( P.3-15)
To Next Page
Loading...
