MIMAKI TS34-1800A - Ink Discharge Passage Washing

4-10
Washing the Ink Discharge Passage (PUMP Tube Washing)
Wash the ink discharge passage regularly to prevent the head nozzles from clogging due to ink coagulation
inside the passage.
1
Press the key in LOCAL.
2
Press to select [PUMP TUBE WASH].
3
Press the key.
• The carriage moves onto the platen.
• Dry suction operation is performed repeatedly until the washing
work is completed.
4
Open the front cover.
5
Fill up the cap with cleaning solution for
maintenance, using a dropper.
• While dry suction stops, fill up the cap with cleaning solution
on the verge of overflow from the cap.
• When the following messages are indicated, check the waste ink tank, and then operate it, referring to
P.4-26 “If a Waste Ink Tank Confirmation Message Appears” according to the situation.
Con f i rm a wa s t e tan k
Con t i nue< >Exchange
Con f i rm a wa s t e tan k
Exchange :
e nt
ST . MA I NTENANCE
CARR I AGE OUT < e n t >
ST . MA I NTENANCE
PUMP TUBE WASH < en t >
ST . MA I NTENANCE
COMP LE TED : e n t
Front cover