MIMAKI TS34-1800A - Page 99

Maintaining the Capping Station
4-9
1
1
1
4
Routine Maintenance
6
Fill up the cap with cleaning solution for
maintenance, using a dropper.
• Fill up the cap with cleaning solution on the verge of
overflow from the cap.
7
Close the front cover then press the key.
8
Press to set the time for the cleaning
solution to be left as it is.
• Set value : 1 to 99 minutes (Unit: minute)
9
Press the key.
• The cleaning solution filled in the cap is absorbed.
• The screen on the right is displayed only for the duration set in the
step 8.
• It returns to the Local after the duration.
• When nozzle missing is not cleared even after this washing is carried out several times, execute “
When Nozzle Clogging Cannot Be Solved” ( P.4-16) and “DISCHARGE & WASH” ( P.4-17) .
When the problem is not solved even after the operation above, contact the distributor in your region
or our service office.
• When this machine is not filled with cleaning solution for maintenance, do the following:
(1) Perform the operations in Steps 1 to 5.
(2) Fill up the cap with cleaning solution for maintenance, using a syringe.
(3) Perform the operations in Step 7 and later.
ST . MA I NTENANCE
LEAV I NG T IME :
1mi n
ST . MA I NTENANCE
LEAV I NG T IME :
2mi n
*Be i ng I n i t i a l i zed*
PLEASE WA I T
<LOCAL . 1>