Maintenance
4-3
1
1
1
4
Routine Maintenance
Cleaning the Exterior Surfaces
When the exterior surfaces of the machine are stained,
dampen a soft cloth with water or a neutral detergent
diluted with water, squeeze it, and wipe the surfaces
with the cloth.
Cleaning the Platen
The platen easily gets dirty with lint, paper dust, etc.
generated when a media is cut.
Wipe off conspicuous stains with a soft-hair brush, a dry
cloth, a paper towel, etc.
• When the platen is stained with ink, wipe
it off with a paper towel containing a
small amount of cleaning solution for
maintenance.
• Before cleaning the platen, make sure that the platen has cooled adequately.
• Because dust and dirt are easily accumulated in the slots for holding a media and cutting paper (cutter
line), be sure to clean these parts carefully.
To Next Page
Loading...
