MIMAKI TS34-1800A - Rear Side and Right Side of the Machine

Names of Parts and Functions
1-5
1
Before Use
3
4
5
6
Rear Side and Right Side of the Machine
AC inlet
Connect the power cable to the AC inlet.
Clamp lever (rear)
Interlocks with the clamp lever in the
font of this machine.
USB 2.0 connector
This is USB2.0 interface connector.
Main power switch
Turns on/off the main power for this machine.
Leave the main power turned on to prevent ink
clogging.
Roll holders
Putting this into the paper core
(right and left) of a roll media,
hold the media. It supports the
paper core of 2 inch and 3 inch.