Front cover
Open the cover in setting of medias, taking of
measures against jamming of medias or in
maintenance inside the station.
Even when the power switch is off, keep this cover
and the other covers closed.
Operation panel
This panel has the operation keys
required for operating the machine and
the LCDs for displaying setting items,
etc.
Clamp lever (front)
Moves the pinch rollers up and down to hold
or release the media.
Power switch
*1
Turns on/off the power to the machine.
Waste ink tank
Waste ink gathers in this tank.
Stand
Supports the main body of the machine. It is
provided with casters that are used to move
this machine.
Maintenance cover
Open the cover in maintenance.
Even when the power switch is off, keep all covers
closed.
Platen
The printed media is sent out, sliding on the
platen.
Ink cartridges
Each cartridge contains an ink of a
particular color.
Cartridge protection cover
This prevents an injury or breakage of the
machine due to a protrusion of the 440 cc
cartridge.
(It is located under the ink cartridge.)
*1 : The power switch under the operation panel lights in green when the power is turned on, and blinks when the
power switch is turned off. The ink clogging prevention function is periodically operated even when the power
switch is OFF if the main power switch keeps being ON. (Auto maintenance function) P.1-5
Take-up device
Automatically winds up the roll media
printed.
Carriage
Move the print head unit from side to side.
To Next Page
Loading...
