MIMAKI UCJV300 Series Guide

- 2 -
Note ............................................................................................................ 1
What is ID cut? .......................................................................................... 3
ID Cut Procedure.......................................................................................4
Preparation ................................................................................................................................... 5
Set up PC. .................................................................................................................................. 5
Printing, and ID Cutting ................................................................................................................. 8
Set the media. ............................................................................................................................ 8
Print data. ................................................................................................................................... 9
ID cut ........................................................................................................................................ 11
How to handle the following cases........................................................12
Troubleshooting .......................................................................................................................... 12
Changed CuttingLink - Server. ................................................................................................... 14
Back up the data of CuttingLink - Server. ................................................................................... 14
Migrate CuttingLink - Server. ...................................................................................................... 14
1. Reset initial setting on CuttingLink - Server PC before migration. ....................................... 14
2. Configure Server on CuttingLink - Server PC to be migrated. ............................................. 14
3. Register CuttingLink - Server PC on RasterLink. ................................................................. 14
When to use CuttingLink - Client? ..............................................................................................15
How to set CuttingLink - Client ................................................................................................. 15
Data in the same place is cut twice ............................................................................................16
When you want to ID cut multiple types of data .......................................................................... 17
TABLE OF CONTENTS

MIMAKI UCJV300 Series Specifications

General

Print Technology	UV-LED inkjet
Max Print Resolution	1200 x 1200 dpi
Power Supply	AC 100-240 V, 50/60 Hz
Ink Type	UV-curable ink
Media Thickness	1 mm or less
Interface	USB, Ethernet
Operating System Compatibility	Windows 10, Windows 8.1, Windows 7
Ink Colors	CMYK, White, Clear