MIMAKI UCJV300 Series - What Is ID Cut

- 3 -
What is ID cut?
It is a function that can cut automatically according to the ID information simply by detecting the ID-contained
data. You do not have to output the cut data again after printing the data. (Typically, you need to print the print
data and the cut data separately.)
• ID Cut Operation Flow
• System configuration
RasterLink
ID Data Print
ID Data
Adjusting the image quality
and colors, and so on.
register marks
detection.
Automatically cut
Cut Data
(Auto)
Printed
Cut Data
(Auto)
Cut data management.
UCJV300/150, CJV300
Plus series
RasterLink
1-4.Regitration of CuttingLink(P. 6)
1-3.Regitration of UCJV300/
150, CJV300 Plus series(P. 5)
USB
or
Ethernet
UCJV300/150, CJV300
Plus series