Mindray BA-88A Operation Manual

4-11
Parameter Description
Edit
formula
Edit the calculation formula. The screen is shown in the following
figure.
How to use the function of the screen to edit formula: the Routine
list the tests to be used in the formula. Click Ins to insert these
tests into the formula. Click Clear to clear all the information
entered in the Formula text box.
Click OK to save; click Cancel to return to the Profile.
Full name Full name of the test. It can be void.
The following table introduces the buttons on the screen.
Buttons Function
Add Add a new calculation.
Delete Delete selected calculation.
Save Save the new calculation or the modified calculation.
Cancel After selecting a test and setting or modifying parameters for it, click
this button to cancel the setting or modification.
Return Click this button to return to the main screen.
The default calculation is shown as follows:
1. GLB （globin）=TP（total protein）-ALB（albumin）
2. A/G= ALB（albumin）/GLB（globin）
3. IBIL （indirect bilirubin）=TBIL（total bilirubin）-DBIL（direct bilirubin）
4. AST/ALT glutamic-oxal(o) acetic transaminase/glutamate-pyruvate transaminase
ratio
5. ApoA1/ApoB apolipoprotein A/apolipoprotein B

Mindray BA-88A Specifications

General

Light source	Halogen lamp
Display	7 inch touch screen
Printer	Thermal printer
Interface	RS232
Wavelengths	340, 405, 546, 578, 630nm
Carry-over	< 1%
Power Supply	AC 100~240V, 50/60Hz
Operating Temperature	15-30°C