4-18
Parameter Description
Conc. Result concentration. While running calibration, this area will
show the set point of the calibrator.
Realtime
ABS
During test, this area shows the real-time ABS. When test is
completed, this area shows the response of the current sample.
Rgt. blk resp For endpoint analysis, the absorbance of the sample blank is
displayed; for Kinetics and fixed-time analysis, the response of
the reagent blank will be displayed.
The following introduces the buttons on the screen.
Buttons Function
QC
record
Click this button to view the QC result of the selected test. Please refer
to 4.5 for more details.
Cal
record
Click this button to view the calibration curve and calibration
parameters of the selected test.
Please refer to 4.4 for more details.
Print
curve
Print reaction curve and test result.
Curve
Data
Click this button to view the reaction curve points of all the periods.
Start Click this button to aspirate and run test. The button can be used as a
substitute for Aspirate button.
Return Click this button to return to the main screen.
The test workflow is shown as follows.
To Next Page
Loading...
Need help?
General
