Mindray BA-88A Operation Manual

4-24
4.6.1 Result
4.6.1.1 View Results by Sample
Figure 4-15 View Results by Sample
Select Sample to display the result by sample; select Test to display the result by
test. The result of the current day will be displayed by default. It there is no test result
for the current day. No data will be displayed.
The following table explains the parameters on the screen.
Parameter Description
Test Name of the test. Select a test to view all the test result of the
current day in the list on the right side of the screen.
Patient Name of patient.
Sample ID Sample ID of the patient.
Unit Unit of the test result.
Test Date The date when test is run.
Reference Reference range of the test.
Original Original result of the test. If the result is edited, the original result is
kept for checking up.
Remark Use simple symbols and abbreviation to comment on the result.
Refer to the appendix of this manual for more details on the
symbols.
All Select all the test names (arranged by test) or sample IDs
(arranged by sample).
The following table introduces the buttons on the Sample screen.

Mindray BA-88A Specifications

General

Light source	Halogen lamp
Display	7 inch touch screen
Printer	Thermal printer
Interface	RS232
Wavelengths	340, 405, 546, 578, 630nm
Carry-over	< 1%
Power Supply	AC 100~240V, 50/60Hz
Operating Temperature	15-30°C