7-5
7.3.3 Upgrading Recorder
Refer to the conrresponding section to install the recorder in your patient monitor.
Refer to the Operator’s Manual for the use of recorder.
7.3.4 Upgrading Analog Output
Refer to the conrresponding section to replace the interface board assembly and DVI
interface board.
Refer to the Operator’s Manual for use of the analog output.
7.3.5 Upgrading iView System
Refer to the conrresponding section to install iView kit in your patient monitor.
Refer to the Operator’s Manual for the use of iView system
NOTE
z When upgrading wireless network, analog output and CIS function for a patient
monitor with standard configuration, you have to replace old PCBAs in the patient
monitor with corresponding PCBAs included in the upgrade kit and remove the
covers of related connectors.
To Next Page
Loading...
