11
BeneVision N22/N19/N17/N15/N12
Quick Reference Guide
d. Select 12-Lead button.
e. Select Setup to enter patient information or adjust Report options.
f. Select Analyze.
g. Select Print to print out the 12-lead ECG report.
NIBP
Initiate A Non-Invasive Blood Pressure Measurement (NIBP)
To initiate a NIBP measurement:
a. Press the NIBP Start/Stop
quick key.
Or
a. Select NIBP tile on the main screen to access the NIBP dialog
.
b. Select Start NIBP.
c. Select the Main Menu
quick key or to return to the main display.
Stop Non-Invasive Blood Pressure Measurement (NIBP)
To stop the current NIBP measurements,
a. Press the NIBP Start/Stop
quick key during the NIBP measurement.
Or
a. Select NIBP tile on the main screen to access the NIBP dialog
.
b. Select Stop NIBP.
c. Select the Main Menu
quick key or to return to the main display.
To stop all NIBP measurements on a patient on the N Series bedside monitor:
a. Press the Stop All
quick key.
Or
a. Select NIBP parameter area to access the NIBP dialog.
b. Select Stop All.
c. Select the Main Menu
quick key or to return to the main display.
Select NIBP Start Mode
Start mode defines how NIBP auto mode works. To set the start mode,
a. Select the NIBP tile on the main screen to enter the NIBP dialog.
To Next Page
Loading...
Need help?
General
