25
BeneVision N22/N19/N17/N15/N12
Quick Reference Guide
c. Select and confirm specified settings.
d. Select Print to the independent printer.
e. Select the Main Menu
quick key or to return to the main display.
Arrhythmia and Alarm Events
The Events page stores 1000 physiological and arrhythmia events on a patient
based on the Alarm Setup dialog.
To view and print an alarm event on a patient on the N Series bedside monitor:
a. Select Review
quick key, or select the Main Menu quick key.
b. Select Events tab from the Review column.
c. Scroll and select event.
d. Select Detail to view the details of selected events.
e. Select
•
to print to the integrated or independent recorder.
•
to print to the independent printer.
f. Select the Main Menu
quick key or to return to the main display.
Note: The waveforms printed are determined by the Record Setup and Print
Setup dialogs on the N series bedside monitor.
Full Disclosure
The N series bedside monitors have the ability to store configured waveforms and
associated numeric information for up to 48 hours.
To adjust waveforms to be stored and print waveforms stored on a patient:
a. Select Review
quick key, or select the Main Menu quick key.
b. Select Full Disclosure tab from the Review column.
c. Select Setup.
d. Select the Storage tab and set the desired waveforms to be stored in the
monitor.
e. Select the Display(Maximum: 3) tab and set the desired waveforms to be
displayed on the Full Disclosure page.
f. Select
to return to the Full Disclosure page.
To Next Page
Loading...
Need help?
General
