To Next Page

To Previous Page

BeneVision N22/N19/N17/N15/N12

Quick Reference Guide

Unit

Opens the Unit dialog.

Rotate Screen (for N22/

N19)

Changes the screen

orientation (between

portrait and landscape).

ECG Lead/Gain

Opens the ECG Lead/Gain

dialog.

Call Help

Calls for help.

HemoSight

Opens the HemoSight

dialog.

EWS

Opens the EWS screen.

GCS

Opens the GCS dialog.

SepsisSight

Opens the SepsisSight

dialog.

Enters the Discharged

Patients dialog.

ECG 24h Sum

Views the 24-hour ECG

summary.

Discharge Patient

Opens the Discharge Patient dialog to discharge the patient and

restore default settings.

Default Chapter3
- Table of Contents3
Quick Keys7
Gestures10
Patient Setup10
- Admit Patient and Enter Demographics (Manual Entry)10
- Enter Demographics from the ADT Database11
- Discharge a Patient12
Standby12
- Enter Standby12
- Resume Monitoring13
- Realtime Waveforms13
- Adjust Recorder's Waveforms13
Print13
- Realtime Waveforms (Laser Printer Connection Required)13
- Adjust Printed Waveforms14
- End Case Report14
Ecg15
- Adjust ECG Lead15
- Enable Pacemaker Detection15
- Initiate ECG Relearn15
- Initiate ST Analysis15
Nibp17
- Initiate a Non-Invasive Blood Pressure Measurement (NIBP)17
- Stop Non-Invasive Blood Pressure Measurement (NIBP)17
- Set a Non-Invasive Blood Pressure Measurement Interval18
- Configure a Custom Sequence18
- Factors that Affect Blood Pressure Measurement Accuracy18
Invasive Blood Pressures (Optional)20
- Adjust Invasive Blood Pressure Label20
- Zero Invasive Blood Pressure21
Continuous Cardiac Output (Optional)21
- Adjust the Displayed Parameters21
Central Venous Oxygen Saturation (Optional)22
- Print Oxygenation Parameters22
Bispectral Index (Optional)22
- Adjust bis Waveform Area22
- BIS Expand View (Bilateral Sensor Required)23
- Adjust Parameters23
Alarms23
- Setting Parameter Alarm Properties23
- Changing Arrhythmia Alarm Settings(Arrhythmia Option Required)24
- Disable Non-Lethal Arrhythmia Alarms (Arrhythmia Option Required)25
- Accessing Help When Technical Alarms Occur25
Reset Alarms25
Pause Alarms/Pause Alarm Tones25
Hemodynamic Monitoring26
- Initiate a Cardiac Output Measurement26
- Initiate Pulmonary Artery Wedge Pressure (PAWP)27
- Initiate Hemodynamic Calculations28
Screen Display28
Review30
- Tabular Trends30
- Arrhythmia and Alarm Events31
- Full Disclosure31
- Oxycrg32
Viewing Other Beds32
- Entering the Remote View Screen32
- Adding a Bed32
- Resetting Alarms for Remote Devices33
- Removing a Bed33
- Saving a Manual Event33
- Displaying the Alarm Watch Tile on the Main Screen33
Volumes34
- Alarm Volume34
- Key Volume34
- Beat Tone34
Date and Time35
Parameter Colors36
Load Default (Preset) Settings36
Lock/Unlock Touchscreen Display36
Pair the Tm80 Telemetry Monitor37
- Pair the TM8037
- Unpair the TM80 Telemetry Monitor from the N Series Bedside Monitor37
- Unpair the N Series Bedside Monitor from the TM80 Telemetry Monitor38
Pair Bp10 Nibp Module38
- Pair the BP10 Module with the N Series Bedside Monitor38
- Unpair BP10 Module from the N Series Bedside Monitor39
Cleaning/Disinfecting39
- Cleaning the Main Unit/Module/Smr39
- Disinfecting the Main Unit/Module/Smr40
- Cleaning and Disinfecting the Accessories40
Sterilization40

Brand	Mindray
Model	BeneVision N15
Category	Medical Equipment
Language	English

Mindray BeneVision N15 Quick Reference Guide

Table of Contents

Other manuals for Mindray BeneVision N15

Questions and Answers:

Mindray BeneVision N15 Specifications

Related product manuals