P/N: 046-017383-00 Rev1.0
6
BeneVision TM80 Quick Reference Guide
PATIENT SETUP
Admit
After discharging the previous patient, you can admit a new patient by
pressing .
Discharge
Discharging the patient will stop monitoring, clear patient information, and
restore default (preset) settings on the TM80.
A patient can be discharged by selecting the Discharge Patient menu.
Note: Discharging the patient on the TM80 discharges the patient from the
CMS.
Select the Discharge Patient menu
1. Press to enter the main menu.
2. Tap Discharge Patient.
3. Select Yes.
• The patient is discharged from both the TM80 and the CMS.
• The patient's configuration is cleared and the configuration is restored
to the saved user configuration or factory default configuration.
• The patient will be added to the discharged patients list at the CMS .
4. Press to admit a new patient.
Adjust Patient Category
The Patient Info menu allows the clinician to adjust the patient category.
Note: Ensure the patient category selection is appropriate for the patient
before monitoring begins. The supported patient categories are Adult and
Pediatric.
To Next Page
Loading...
Need help?
General
