P/N: 046-017383-00 Rev1.0
20
BeneVision TM80 Quick Reference Guide
3. Enter the passcode to unlock the screen.
Once the passcode is entered the screen is temporarily unlocked. If the
clinician turns off the TM80 or the display times out, the passcode will
need to be re-entered.
ADJUST VOLUMES
The clinician is able to adjust alarm volumes, key volumes, and QRS volume on
the TM80.
To adjust the volume settings:
1. Press to enter the main menu.
2. Tap Audio Volume.
3. Select the category to adjust and drag the slider to the appropriate
volume.
4. Press to return to the main screen.
PARAMETER COLORS
The TM80 provides the ability to adjust the parameter's numeric and waveform
(if applicable) color.
To adjust the parameter's color at the TM80:
1. Press to enter the main menu.
2. Tap Parameter Setup.
3. Tap the parameter.
4. Tap Color.
5. Select the color.
6. Press to return to the main screen.
Note: The parameter color configuration on the TM80 and the CMS are
independent.
To Next Page
Loading...
Need help?
General
