DICOM 11-5
11.1.3.2 Print Service Preset
1. On DICOM Service screen, click [Print] page tab to enter the Print page.
2. Select device, enter the right AE Title, port, etc.
3. Click [Add] to add the service to the Service List.
DICOM print preset items are described as follows:
Name Description
Configure
the New
Service
Device
After you set the server (s) in DICOM Preset screen, the name
(s) will appear in the drop-down list, select the name of the print
server.
Service Name Default is xxx-Print, user-changeable.
AE Title
Application Entity title, here, it should be consistent with that of
the print server.
Port
DICOM communication port, 104 is default. Here, the port
should be consistent with that of the print server port.
Maximum Retries Set the maximum retries.
Interval Time (s) Interval time that the system retries a connection.
Timeout Refers to timeout during association establishment.
Print
Properties
Copies
Refer to copies of printed files. You can select among 1 through
5, or directly enter the numeral.
Settings
The system supports RGB (color printing) and
MONOCHROME2 (black and white printing). Please select the
type the printer supports.
To Next Page
Loading...
