Mindray DC-33 - Image Optimization; Imaging Mode; Switching between Imaging Modes; Image Adjustment

Image Optimization 5-1
5 Image Optimization
WARNING:
The images displayed in this system are for
reference only. Mindray is not responsible for
the correctness of diagnostic results.
In Dual-B imaging mode, the measurement
results of the merged image may be
inaccurate. Therefore, the results are provided
for reference only, not for confirming
diagnoses.
5.1 Imaging Mode
5.1.1 Switching Between Imaging Modes
Switch between imaging modes according to the actual situation.
5.1.2 Image Adjustment
 Adjust using the touch screen.
1. Mode display area (or main functional tabs): displays the current modes. Tap the tab
to enter the mode.
3
1
2
4