Mindray DC-33 User Manual

A-2 Barcode Reader
1. Cable interface port
2. Interface cable modular connector
A.1.3 Setting
The reader has factory settings; please refer to A.4 for details.
The reader supports some user-defined functions as introduced below.
For more details, please contact the SYMBOL reader agents or Mindray Customer Service
Department.
 Volume setting:
Scan the following barcode to set the volume parameter.
 Code 93 and codebar scanning:
To enable or disable Code 93, scan the appropriate barcode below.
To enable Codebar, scan the appropriate barcode below.

Mindray DC-33 Specifications

General

Transducer Ports	2
Cine Loop	Yes
Hard Drive	500 GB
Display	15 inch LCD
Power Supply	100-240V AC, 50/60 Hz
Battery Life	Not applicable
Imaging Modes	B, M, Color Doppler, Power Doppler
Transducer Frequency	1-10 MHz
Applications	Abdominal, Cardiac, OB/GYN, Vascular, Small Parts
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Storage	USB
Operating System	Windows-based