2 System Overview
Operator’s Manual 2 - 5
5. Battery /
6. Ultrasound gel warmer Should be configured with the bracket of the ultrasound
gel warmer.
7. Ultrasound gel warmer
holder
Should be configured with the ultrasound gel warmer.
8. Storage Tray Kit /
9. ECG module /
10. ECG cable The ECG module should be configured.
11. DC-IN cable The ECG module should be configured.
12. PCG The ECG module should be configured.
13. Fusion imaging module Contains 1 magnetic navigation controller, 1 magnetic
generator, and 2 fusion imaging sensors.
Fusion imaging should be configured.
14. Fusion imaging module
(including trolley)
Contains 1 magnetic navigation controller, 1 magnetic
generator, 2 fusion imaging sensors, and 1 trolley for the
magnetic generator.
Fusion imaging should be configured.
15. Fusion Control Unit
Container
Used for carrying the magnetic navigation controller.
Fusion imaging module or fusion imaging module
(including trolley) should be configured.
16. Trolley for magnetic
generator
/
17. Motion sensor support Fusion RESP Component should be configured.
18. NB-011 SP5-1U
19. NB-022 SC6-1U/C5-1U
20. NB-024 C6-2Gs/C6-2GU
21. NB-025 V11-3HU
22. NB-026 L11-3U
23. NB-028 SC5-1U
24. NB-029 SC8-2U
25. NB-035 L14-5WU
26. NB-036 C4-1U
27. NB-051 ELC13-4U
28. NB-054 L14-3WU/L13-3WU/L15-3WU
29. Probe extend module PCM-
SU01
The P8-2Ts, P7-3Ts, P8-3Ts, C6-2Gs, 7LT4s and L16-
4Hs probes can be connected to the ultrasound system
through the probe adapter.
30. iClear
+
Dongle iClear
+
should be configured.
31. Barcode reader (1D or 2D) /
No. Item Remarks
To Next Page
Loading...
