Need help?Do you have a question about the Mindray UA-66 and is the answer not in the manual?
General| Sample Type | Urine |
|---|---|
| Test Method | Reflectance photometry |
| Device Type | Urine Analyzer |
| Data Storage | Up to 10, 000 results |
| Display | Touchscreen LCD |
| Connectivity | USB, RS-232, Ethernet |
| Test Time | 60 seconds |
| Storage Capacity | 10, 000 results |
| Power Supply | AC 100-240V, 50/60Hz |
Lists conditions and circumstances under which the warranty is not applicable or void.
Details the performance parameters, power requirements, dimensions, weight, and environmental operating conditions.
Provides essential steps and precautions for the correct installation of the UA-66 Urine Analyzer.
Specifies optimal environmental conditions including temperature and humidity for stable instrument performance.
Guides the user on how to carefully unpack the instrument and check for included accessories and potential damage.
Details the procedure for connecting the UA-66 to a computer using the RS-232C serial port.
Step-by-step instructions for powering on the instrument and initiating self-diagnosis.
Instructions for installing a new paper roll into the instrument's printer.
Explains how to adjust the screen contrast for optimal readability using a potentiometer.
Introduces the main menu structure and navigation keys of the UA-66 software.
Guides on setting the correct reagent strip type in the instrument's options menu.
Explains how to set critical values for comparison with test results.
Details how to select the desired unit system for displaying and printing test results.
Instructions for setting and correcting the instrument's internal date and time.
Guides the user to choose between single, slow batch, or fast batch testing modes.
Explains how to input or select sample numbers for identifying test results.
Explains the procedures for slow batch and fast batch testing modes, including strip immersion timing.
Describes how to interrupt and stop an ongoing test cycle using the ESC key.
Guides on how to view and manage stored reports by date.
Provides guidelines for cleaning the exterior of the instrument to maintain its condition.
Detailed steps for cleaning the feed table insert and calibration chip daily for optimal performance.
To Next Page