UA-66 Urine Analyzer Operator’s Manual
- 22 -
5 Reports
The instrument can store up to 1000 reports in its Flash ROM. A report is saved to the Flash
ROM immediately after a test is done. When the storage overflows, the oldest 333 reports will be
dropped. All the reports can be recalled via the “Reports” menu.
5.1 Date List
At the main menu( see Figure 2.5 ), use ▲ and ▼ to select “Reports” and press START, the
instrument begins to search through the report storage, then lists all the date in ascending order.
The most recent date is listed at the bottom of the display.
Reports
2002-05-18
2002-05-19
2002-05-21
2002-05-22
2002-05-23
2002-05-24
2002-05-25
2002-05-26
2002-05-28
2002-05-30
Figure 5.1
Use ▲ to select the previous date and ▼ to select the next date. At this moment, the operator
can
♦ Change the selected date by input a date directly.
♦ Delete the reports generated between two specified dates;
♦ Transmit reports of the selected date;
♦ Print reports of the selected date;
Press
FUN to show a pop-up menu.
Select Date
Delete
Transmit
Print
Figure 5.2
Use ▲ and ▼ to select “Select Date” and press START, the instrument prompts the operator to
input a new date:
Select Date
2002-05-23
Figure 5.3
Use ► to move the high lightened block among the year, month and day fields, use ▲ and ▼ to
modify the highlighted field and press START when done. The date list in Figure 5.1 will scroll to
the specified date. If the specified date does not exist in the list, The date list will scroll to the
To Next Page
Loading...
