Mindray UA-66 - Batch Mode Testing Procedures; Batch Mode Operation; Stopping the Test Cycle

UA-66 Urine Analyzer Operator’s Manual
- 20 -
4.4 The Batch Modes
If “Slow Batch Mode” was selected, the instrument will prompt operator to dip the reagent strip
60 seconds after the first strip test started.
If “Fast Batch Mode” was selected, the instrument will prompt operator to dip the reagent strip
30 seconds after the first strip test started.
012 09:12:36
013
█████
014
██
LEU -
NIT -
URO normal
PRO +-
PH 7.0
BLD 1+
SG 1.010
KET 8.0 mmol/L
BIL 3+
GLU 3+
Press
’START’
Figure 4.5
At any moment during the test cycle, operator can browse the reports generated recently using
▲ and ▼. Operator can mark a report by press FUN. The mark can be seen later in the report
menu.
4.5 Stop Testing
At any moment during the test cycle, operator can stop the testing process by pressing ESC,
the display will return to the main menu ( see Figure 2.5. ).