Mindray UA-66 - Page 31

UA-66 Urine Analyzer Operator’s Manual
-23-
nearest date.
Select “Delete” item of the pop-up menu (See Figure 5.2) and press
START to delete reports
generated between 2 specified dates. First the instrument asks the operator to enter the start
date.
From
2002-05-23
Figure 5.4
Use ► to move the high lightened block among the year, month and day fields, use ▲ and ▼ to
modify the highlighted field and press START when done. Then the instrument asks the operator
to enter the end date.
To
2002-05-23
Figure 5.5
Use ► to move the high lightened block among the year, month and day fields, use ▲ and ▼ to
modify the highlighted field and press START when done. At last the instrument prompts the
operator to confirm.
Delete the reports
from 2002-05-19
to 2002-05-23 ?
Yes No
Figure 5.6
Select “Yes” and press
START to delete the reports. Select “No” and press START to abandon.
Select “Transmit” item of the popup menu (See Figure 5.2) and press START to transmit reports
of the selected date. First the instrument asks the operator to enter the start sample No.
Start No.
000
Figure 5.7
Modify the start sample No. using ▲ , ▼ and ► , and then press START when done. The
instrument asks the operator to enter the end sample No.
End No.
999
Figure 5.8
Modify the end sample No. using ▲ , ▼ and ► , and then press START when done. The
instrument begins to transmit the reports between the start No. and the end No. to the host
computer via RS-232C serial port. A message box will be shown during the transmission.