Mindray VS-900c Quick Reference Guide

8
Accutorr
®
Quick Reference Guide
Initiate A Non-Invasive Blood Pressure Measurement (NIBP)
To initiate a NIBP measurement on a patient on the Accutorr 7 monitor:
a. Press the hardkey on the monitor's front panel.
Or
a. Select NIBP parameter area to access the NIBP Setup menu.
b. Select Start NIBP
c. Select the Main quick key or to return to the main display.
*If NIBP Start/Stop is enabled in the Remote Control menu of BeneVision
Central Monitoring System (BeneVision CMS): Selecting Start NIBP
Measurement on the BeneVision CentralStation and BeneVision WorkStation will
initiate a NIBP measurement on the Accutorr 7 monitor.
Stop Non-Invasive Blood Pressure Measurement (NIBP)
To stop the current NIBP measurements on a patient on the Accutorr 7 monitor,
you can press the hardkey on the monitor's front panel during the NIBP
measurement.
To stop all NIBP measurements on a patient on the Accutorr 7 monitor:
a. Press the hardkey on the monitor's front panel.
Or
a. Select NIBP parameter area to access the NIBP Setup menu.
b. Select Stop All.
c. Select the Main quick key or to return to the main display.
*If NIBP Start/Stop is enabled in the Remote Control menu of BeneVision
Central Monitoring System (BeneVision CMS): Selecting Stop NIBP
Measurement on the BeneVision CentralStation and BeneVision WorkStation will
stop a NIBP measurement on the Accutorr 7 monitor.

Mindray VS-900c Specifications

General

Brand	Mindray
Model	VS-900c
Category	Medical Equipment
Language	English