Minebea Intec ISEDE-16-34-64-H - Page 24

Specication blockSp. block 1*Sp. block 2Sp. block 3Sp. block 4Sp. block 5Sp. block 6
Weighing rangestandardcongurab-
le
congurab-
le
congurab-
le
congurablecongurable
Zero tracking ±2 % (kg)±0,32±0,12±0,06±0,24±0,32±0,24
Initial zero point range
(kg)
±1±1±1±1±1±1
Preload
1)
(kg)
41417848
ISO test function
2)
yesyesyesyesyesyes
1)
There is no reduction of the max. load up to the specied preload. Higher preloads
reduce the max. load in increments of 0.1 kg.
2)
The ISO test function is unavailable starting with preloads higher than approx. 13 kg.
* = factory setting
ISEDE-16-H(V1): Block 7 bis 12
Specication blockSp. block 7Sp. block 8Sp. block 9Sp. block
10
Sp. block 11Sp. block
12
Select with menu code:10 3 710 3 810 3 910 3 1010 3 1110 3 12
Max. load (kg)1616121663
Readability (g)0…3 kg: 1
3…6 kg: 2
6…16 kg: 5
22521
Weighing rangestandardcongurab-
le
congurab-
le
congurab-
le
congurab-
le
congurab-
le
Zero tracking ±2 % (kg)±0,32±0,32±0,24±0,32±0,12±0,06
Initial zero point range (kg)±1±1±1±1±1±1
Preload
1)
(kg)
44841414
ISO test function
2)
jajajajajaja
1)
There is no reduction of the max. load up to the specied preload. Higher preloads
reduce the max. load in increments of 0,1 kg.
2)
The ISO test function is unavailable starting with preloads higher than approx. 13 kg.
* = factory setting
ISEDE-16-HCE: Block 1 bis 6
Specication blockBlock 1*Block 2Block 5Block 6
Select with menu code:10 3 110 3 210 3 510 3 6
Accuracy classIIIIIIII
Max. load (kg)1661612
ISEDE‑16‑34‑64‑H(V1) | ISEDE‑16‑34‑HCE | ISEDE‑64‑S(V1) | ISEDE‑64‑SCE6 Specications
Minebea IntecEN-22