2.4Before operational startup
NOTICE
Perform visual inspection.
Before operational startup as well as after storage or transport, inspect the load cell
visually for signs of mechanical damage.
The weighing platform may not be put into operation if it has visible damage and/or
is defective.
Remove the device from the packaging.
Acclimatizing the device
-Condensation can form on the surfaces of a cold device when it is brought into a
substantially warmer area.
-Unplug the device from the power supply and allow it to acclimatize for about 2 hours
at room temperature.
2 Safety instructionsISEDE‑16‑34‑64‑H(V1) | ISEDE‑16‑34‑HCE | ISEDE‑64‑S(V1) | ISEDE‑64‑SCE
EN-7Minebea Intec
To Next Page
Loading...
