1
2
Target ID
Target signals contain both ferrous and
conductivity information. This is digitally
processed and results in a number being
displayed that distinguishes between
different types of metal.
Target ID numbers range from -4 to 44
on the X-Terra 30 and -9 to 45 on the X-Terra
50. Negative numbers represent ferrous
targets and positive numbers represent
non-ferrous targets.
Numeric ID
These numbers have another function.
They are also used when adjusting the
menu settings (sensitivity, volume, noise
cancel*
and ground balance*) showing
the numerical value selected.
5
AL
To Next Page
Loading...
Need help?
General
