Minelab X-Terra 50 - Coil Incompatible; Overload

1
2
3
4
5
AL
1
2
3
4
5
AL
1
Coil Incompatible
The coil is communicating
with the control box
but the detector is not
recognising it.
1
1
2
3
4
5
AL
Overload
The detector has
received a signal that
is too strong for it to
interpret. This will
appear until there is no
more overload (pg. 20).
The menu scale line
icon will slowly flash.
61
Take the coil away
from the source of
overload.
Turn the detector off
before connecting a
standard coil.
Once all errors are resolved the detector will
begin operation with a blank detection screen.