Displays
Vehicle features and options
This chapter describes model-specific
equipment, systems, and functions that are
currently available, or may become available
in the future, even if they are not present in
the vehicle.
Additional information:
Vehicle equipment, refer to page 8.
Trip data
Principle
The trip data display provides various in-
formation about the trip, e.g., average con-
sumption or trip distance.
The values can be displayed and reset de-
pending on different intervals.
Viewing trip data
The Interaction Unit can be used to view
the trip data. There are several ways to view
trip data:
– Go through the menu as follows: Apps
menu / "Vehicle" / "Trip data".
– Tap the range value on the Interaction
Unit.
– On the Interaction Unit, tap the odome-
ter reading in the speedometer.
Additional information:
Speedometer, refer to page 139.
Display
The following trip data is displayed:
– Configured interval for displaying trip
data.
– Average fuel consumption depending
on the configured interval.
– Travel time depending on the config-
ured interval.
– Distance traveled depending on the
configured interval.
– Distance traveled in Coasting mode.
Current consumption
The current fuel consumption display al-
lows you to check the current fuel consump-
tion, e.g., to drive economically and in an
environmentally-friendly manner.
Average consumption
The average fuel consumption is displayed
depending on how the interval for display-
ing trip data is configured.
Adjusting the display of the trip
data
The intervals for displaying trip data can be
configured.
1. To go to the Trip Data menu: Apps
menu / "Vehicle" / "Trip data".
2. Tap the interval button.
3. Select the desired setting:
– "for this trip": the values are auto-
matically reset approx. four hours af-
ter the vehicle has come to a stand-
still.
– "since last refuel": the values are au-
tomatically reset after refueling with
a larger quantity of fuel.
Seite 131
Displays CONTROLS
131
Online Edition for Part no. 01405B37A59 - II/24