Wheels and tires
Tire pressure specifications
The tire pressure table contains all tire in-
flation pressure specifications for given tire
sizes at ambient temperature.
After correcting the tire pressure
If vehicle is equipped with the Tire Pres-
sure Monitor, corrected tire pressures are
applied automatically. Make sure that the
correct tire settings have been made. When
using tires not listed in the tire inflation
pressure specifications on the Interaction
Unit, reset the Tire Pressure Monitor.
If equipped with a flat tire monitor, reiniti-
alize the flat tire monitor.
Checking the tire pressure
Regularly check the tire inflation pressure
and correct it as needed:
– At least twice a month.
– Before embarking on an extended trip.
Electronic oil measurement
Functional requirements
A current measured value is available after
approx. 30 minutes of normal driving with
the combustion engine running.
Displaying the engine oil level
To bring up the engine oil level, go
through the menu as follows: Apps menu /
"Vehicle" / "Vehicle status" / "Engine oil
level".
The engine oil level is displayed.
Adding engine oil
General information
Safely park the vehicle and switch off drive-
ready state before adding engine oil.
Adding engine oil
1. Opening the hood.
2. Open the lid counterclockwise.
3. Add engine oil.
4. Close the lid.
Providing assistance
Hazard warning system
The hazard warning system button is
located on the switch cluster.
Seite 28
QUICK REFERENCE On the road
28
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
