Adjusting steering wheel heating
Automatic program
When the automatic program is activated,
the intensity of steering wheel heating can
be adjusted. As you drive, the heater output
is automatically adjusted according to your
set intensity.
Adjusting steering wheel heating
manually
The heater output level can be adjusted
manually:
1. Tap the button with temperature dis-
play.
2. Press the steering wheel heating button
repeatedly until the desired level is se-
lected, arrow.
If a consumption-optimized drive mode is
selected, the heater output is reduced.
Ventilation
Principle
The ventilation system has different options
for direct or indirect ventilation to optimize
air flow in the vehicle.
The air flow heats or cools noticeably, de-
pending on the set desired temperature.
Front ventilation
– To adjust the air flow direction, push the
button in the desired direction.
– To adjust the air flow, turn the knob to
open and close the vents variably.
Setting the ventilation
Depending on the desired ventilation, align
the air flow directly or indirectly toward the
passengers.
Open the air vents and position them to
ensure effective climate control.
Air quality
General information
The following components improve the air
quality inside the vehicle:
– Emissions-tested vehicle interior.
– Interior filter.
– Air conditioning system to control the
temperature, air flow, and air recircula-
tion.
– Pre-ventilation.
Interior filter
The interior filter cleans the incoming fresh
air or the circulated interior air in recircula-
tion mode.
Depending on the equipment:
Seite 251
Climate control CONTROLS
251
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
