3D view
Principle
With 3D view, a circle is displayed around
the vehicle top view in the selection win-
dow.
Fixed perspectives can be selected directly
on the circular path in the selection win-
dow, or by swiping the vehicle in the middle
of the camera image.
The current perspective is marked with a
camera icon on the circular path.
3D view can be turned on/off using the In-
teraction Unit.
General information
Follow the information in the "Parking as-
sistance systems" chapter.
Turning the 3D view on/off
1. To turn on 3D view, press the
Park Assist key on the switch cluster.
The parking assistance systems view is
displayed.
2. In the upper selection area, select the
following camera view: "3D".
To exit 3D view, select another camera view
from the selection at the top.
Car wash view
Principle
The car wash view assists when entering a
car wash.
This function can be turned on/off using
the Interaction Unit.
General information
Follow the information in the "Parking as-
sistance systems" chapter.
Turning the car wash view on/off
1. To turn on car wash view, press
the Park Assist key on the switch clus-
ter.
The parking assistance systems view is
displayed.
2. In the upper selection area, select the
following camera view: "Car wash".
To exit car wash view, select another cam-
era view from the selection at the top.
Display
Your own lane is displayed for easier driv-
ing into a car wash.
This view can be used to position the ve-
hicle correctly within the washing system
guide rails.
In a car wash, the vehicle must be able to
roll freely forward.
Additional information:
Rolling or pushing the vehicle, refer to
page 119.
Seite 226
CONTROLS Parking
226
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
