1. Tap the button with temperature dis-
play.
2. Set the desired temperature.
– Raise the temperature.
– Lower the temperature.
Do not rapidly switch between different
temperature settings. Otherwise, the auto-
matic climate control will not have suffi-
cient time to adjust the set temperature.
Air flow
Principle
The air flow generated by the blower can be
adjusted as needed.
The air flow may be reduced to preserve the
vehicle battery.
Adjusting the air flow
The air flow can be configured using the
Interaction Unit:
1. Select the Climate menu icon on
the menu bar.
2. Select the desired setting.
– Tap the large air flow icon to
increase the air flow.
– Tap the small air flow icon to
reduce the air flow.
Air distribution settings
Principle
The air distribution can be adjusted as re-
quired in manual mode.
Adjusting the air distribution
The air distribution can be adjusted via the
Interaction Unit:
1. Select the Climate menu icon on
the menu bar.
2. Select the desired setting:
– Aim the air flow downward, arrow 1.
– Aim the air flow upward, arrow 2.
– Aim the air flow at the windshield,
arrow 3.
The selected air distribution is displayed.
Air conditioning
Principle
With the climate control function, the air
inside the vehicle is cooled and dehumidi-
fied, then warmed again depending on the
temperature settings.
Functional requirement
The climate control function can be used
with standby or drive-ready state.
Seite 247
Climate control CONTROLS
247
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
