– The Privacy Policy has been accepted.
– The MINI app is installed on the mobile
device.
– The MINI app is linked to the MINI Con-
nected account.
– The vehicle is parked and locked.
– The Anti-Theft Recorder can only be
used if vehicle is equipped with an
alarm system.
Ensure that the faces of occupants are visi-
ble and are not partially or completely cov-
ered, for instance by face masks.
Additional information:
Data protection, refer to page 59.
Activating/deactivating interior
camera
The interior camera can record and send
data when activated, then be deactivated.
1. Go through the menu as follows: Apps
menu / "All" / "Interior camera" /
"Settings".
2. Select the desired setting.
Interior camera
Recording mode
Recording
mode
Function
"Single
photo"
Shortly after triggering, a
photo will be taken.
"Smile" When the system detects
a smile, a picture will be
taken.
"Self-timer
(3 sec.)"
After the timer has expired,
a photo will be taken.
"Burst
mode"
Shortly after triggering, a
series of pictures will be
taken.
Take picture
A photo can be taken as follows:
1. Go through the menu as follows: Apps
menu / "All" / "Interior camera" /
"Camera".
2. Select the desired recording mode.
3. Trigger a photo.
Depending on the recording mode selected,
photos are taken shortly after being trig-
gered, when a smile is detected, or when
the timer elapses.
For burst shots, the series of pictures will
be displayed as a preview.
Recording video
Videos can be recorded as follows:
1. Go through the menu as follows: Apps
menu / "All" / "Interior camera" /
"Camera".
2. Select the recording mode for video re-
cording.
3. Start the video recording.
You can only record video for a certain
time.
Displaying and managing
recordings
Saved recordings can be played, sent, and
deleted in the vehicle.
In some national-market versions, record-
ings are only shown on the Interaction Unit
for up to approx. 2 mph/3 km/h for safety
purposes.
1. Go through the menu as follows: Apps
menu / "All" / "Interior camera" /
"Gallery".
2. Select the desired recording.
3. Select the desired setting.
Scan the QR code shown on the Interaction
Unit to send recordings to a mobile device.
Seite 261
Interior equipment CONTROLS
261
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
