4. Observe the instructions on your smart-
phone.
The MINI ID is automatically transfer-
red to the vehicle if the MINI app is
installed on the smartphone where the
MINI ID is saved.
If no MINI ID is currently available, a
new MINI ID can be registered.
5. Change additional settings as necessary,
e.g., automatic driver recognition.
The vehicle is added to the user’s MINI app.
Alternatively, the authorized service center
can register the MINI ID and add it to the
vehicle.
Confirming a MINI ID
If the MINI ID was registered by the au-
thorized service center and added to the ve-
hicle, the MINI ID must be confirmed on the
Interaction Unit in the respective vehicle.
1. Select the MINI ID.
2. Scan the QR code shown.
3. Follow the instructions on your smart-
phone.
MINI app
If a MINI ID has been added to the vehicle,
the vehicle is automatically added to the
MINI app. This means that MINI app func-
tions can be used for this vehicle. To do so,
the MINI app must be used with the same
MINI ID.
Alternatively, an authorized service center
can add a vehicle to the MINI app. In this
case, the MINI ID must then be confirmed
on the Interaction Unit in the correspond-
ing vehicle.
In rare cases, the use of MINI app functions
for this vehicle may be restricted. More in-
formation is given on the Interaction Unit.
Primary user
The primary user is the person who first
adds their MINI ID to the vehicle and the
vehicle to their MINI app. Alternatively, the
primary user can be specified by an author-
ized service center.
The primary user has access to the follow-
ing settings, for example:
– Removing the MINI ID saved to the ve-
hicle.
– Transferring the primary user role to an-
other MINI ID.
– Configuring vehicle-wide data protec-
tion settings.
– Creating the main digital key.
Additional information:
MINI Digital Key, refer to page 80.
Personalized settings
Automatic driver recognition
Principle
Automatic driver recognition can activate a
MINI ID as soon as the vehicle is unlocked.
To do so, a vehicle key or digital key must
be assigned to the MINI ID. The MINI ID
can be changed after unlocking.
If driver recognition has been configured,
automatic activation of the MINI ID is trig-
gered by the following:
– By unlocking the vehicle using the but-
ton on the assigned vehicle key.
– By unlocking the vehicle using a door
handle. The assigned vehicle key or the
assigned Digital Key must be carried
with you.
– By unlocking automatically when ap-
proaching the vehicle. The assigned ve-
hicle key or the assigned Digital Key
must be carried with you. Depending on
Seite 61
Personal settings CONTROLS
61
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
