Overview
The levers for setting the seats are located
on the front seats.
Setting the longitudinal direction
Warning
If a seat is not locked, it may move
unexpectedly while driving. Vehicle con-
trol could be lost. There is a risk of ac-
cident, injury, or property damage. After
adjusting, move the seat forward or back
slightly, making sure the seat engages
properly.
To adjust the longitudinal direction, pull up
the longitudinal direction lever at the front
of the seat and push the seat in the desired
direction.
Adjusting the height
To adjust the height: On the side of the
seat, push the seat height lever up or down
as many times as necessary for the seat to
reach the desired height.
Adjusting backrest tilt
To adjust the backrest tilt, pull the backrest
tilt lever on the side of the seat and tighten
or loosen the backrest as required.
Electrically adjustable seats
Principle
Electrically adjustable seats are operated
using the switches on the seat.
The current seat position can be stored us-
ing the memory function.
Additional information:
Memory function, refer to page 106.
Seite 95
Seats, mirrors and steering wheel CONTROLS
95
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
