Refer to the applications instruction manual on how the view the remote feed.
With Microsoft Net messenger, simply click on the play button. The option dia-
log box allows remote control over some of the camera’s functions. By clicking
on the source button in the video tab, zoom and focus
controls can be accessed; the controls are located on the
camera control tab of the dialog box. Image magnification
can be adjusted with the zoom slider.
Clicking the auto check box on the focus
option, focuses the camera. However, focus
is not continuous and the box must be
checked each time focusing is required.
101
NOTES ON REMOTE CAMERA OPERATION
When using the remote camera, exposure, white balance, and camera sensitivity are set to auto. The
optical and 4X digital zoom are active. There are no menu controls. The monitor cannot be turned off.
The flash is disabled. There is no audio.
The camera can be focused periodically by pressing the shutter-
release button partway down. The AF system does not continually
focus when the button is pressed and held so the operation should
be repeated as the subject distances changes.
Because of the data rate, there may be delays when the camera is
focused or zoomed.
The charger can be used as a camera stand. When the camera is
on, the charger does not charge or supply power to the camera.
To Next Page
Loading...
Need help?
General
