24 RECORDING - BASIC OPERATION
LCD MONITOR DISPLAY - BASIC
If the shutter speed falls below the point where the camera can be hand held
safely, the camera-shake warning indicator will appear on the monitor and the
viewfinder indicator lamp will turn green and blink slowly. Camera shake is
slight blurring caused by subtle hand motion and is more pronounced at the
telephoto position of the lens than at the wide-
angle position. Although the warning appears, the
shutter can still be released. If the warning
appears, place the camera on a tripod or use the built-in flash.
CAMERA-SHAKE WARNING
Image size (p. 44)
Image quality (p. 44)
Battery-condition indicator (p. 16)
Drive mode (p. 40)
Frame counter (p. 45)
Focus signal (p. 27)
Recording mode
Flash modes (p. 28)
Camera-shake warning
Wide focus frame
LCD monitor
To Next Page
Loading...
Need help?
General
